Complete Sandblasting room and Painting line

  • Home
  • Complete Sandblasting room…

Powder painting Line
shot blasting / corundum cabin + powdering cabin + dryin oven

Shot blasting / corundum cabin

Useful dimensions:
- Length: 5 to 12 m
- Width: 3 to 4 m
- Height: 2.8 m

1. Sandblasting chamber (optional Atex):

– reinforced steel tubular structure with 100 mm sound insulation.
– 3 mm pendulum rubber with 120 mm low steel protection.
– neon lights in waterproof unbreakable armored luminaires.
– electrical box with door and operating safety.

2. Ventilation and dust removal (optional Atex):

– armored dust collector with polyester cartridges, special corundum.
– motorized fan on horizontal chair 15 kW, 1,500 rpm, 77 dB.
– flow 19 000 m3/h at 200 mm CE, discharge less than 1 mg / m3.
– automatic unclogging with electrical clogging measurement.

3. Recycling of abrasive, sandblaster and operator equipment:

– 5 mm thick armored bucket elevator with recovery hopper.
– abrasive cleaning at 3 levels: fine, medium and large, baffles 10 mm.
– 200 liters forklift sandblaster below a 1200 liters reserve.
– electric order
– Full equipment sander: panoramic helmet with air heater, two-stage
air filter, leather suit …

Powdering cabin

Useful dimensions:
- Length: 5 to 12 m
- Width: 3 to 4 m
- Height: 2.8 m

4. Powdering chamber (optional Atex):

– reinforced tubular steel structure 100×100 mm.
– enclosure made of 100 mm double skin panels.
– neon lights in waterproof luminaires.

5. Ventilation and dust removal (Atex optional):

– rear suction box at the back of the cabin.
– suction connected to the blasting / corundum cabin.
– option: independent clean dust collector (for powder recycling).

Drying oven

Useful dimensions:
- Length: 5 to 10 m
- Width: 3 m
- Height: 3 m

6. Drying oven:

– Structure in 150 mm steel tube and 5 mm steel sheet bent.
– oven in 1 mm double skin panels with internal galvanized sheet.
– 150 mm thermal insulation by high temperature rock wool.
– electrical box with regulation and safety devices.

7. Heating module:

– monobloc module with 150mm thermal insulation.
– Riello gas burner 390 kW / 336,000 kcal / h.
– high temperature recycling fan, power 9 kW.

8. Guarantee: Manufacturer: 5 years parts

Ligne-Cab : Powder painting Line
shot blasting / corundum cabin + powdering cabin + dryin oven

Amount of the supply excluding tax, ex works: from € 78 000

Delivery time: 6 to 12 weeks

Payment terms: transfer
– 40% when ordering, 60% when made available to the factory.

Options:
– Possibility of placing conveyor rails (height: Powder 3.30 m, Oven 3.25 m)
– Transport and assembly: on quotation
– ATEX standards (EXplosive ATmospheres): on quotation

Doing the Right Thing, at the Right Time!